Camp CruiserThis has been a real puzzle! The centerboard was bound up and no longer functioning properly. It was a challenge to remove, but the guys figured it out. They made a guide, shaved down the centerboard until it was the right size, and then added a fresh layer of fiberglass. It's operating smoothly now! ElectriCraftShane had a bit of a puzzle here too as he worked to put the propeller back on the shaft and get far enough down the shaft to fit a nut and pin into place behind it. Super SportShane is shaving down the laminated chines from last week to get the angle just right. Concordia SloopShane continued to work on scraping and sanding the Concordia Sloop this week, and he found an old name! We think it probably said "Leda". 1947 Chris Craft Deluxe RunaboutJack has been repairing some rot along the side of this Deluxe Runabout. He's just about got the side pieces back in place. On to the bottom next week! 1957 Chris Craft ContinentalThe guys ran a couple of engine tests this week. Here's a video of one!
0 Comments
U-18Jack spent a lot of time this week working on this engine. He cleaned it, repainted it, and refitted parts from the old engine. When the rebuilt starter comes back, they'll be able to fire it up! 1947 DeluxeJack also finished dry fitting the bottom of the 1947 Deluxe and installed a new transom piece. Super SportIt took some team work to laminate the milled oak to the shape of the chine. The clamps will hold it in place while the glue dries in the curved shape. ElectriCraftJack sanded, prepped and painted the bottom of this boat this week. It's looking great!
1950 RivieraThe guys got this engine running this week. 1947 Chris Craft Deluxe RunaboutJack spent a lot of time cleaning the bottom planks on this boat this week. He's finished installing the plywood bottom and he's working on getting the planks installed now. Carolina Flats BoatThe first coat of paint is on the deck! It looks so crisp and clean already! U-18Gary picked this engine up in Georgia yesterday and brought it back to the shop, where Jack has been cleaning it and starting on a general inspection and tune up. Swim PlatformGary's getting the varnish on this swim platform he's been restoring.
1959 Chris Craft ContinentalThe guys took the '59 to the lake for a sea trial. They determined that the bed log needed to be rebedded, and they got that done this week, too. GarwoodJack fixed the seized throttle cable, installed a new battery switch, and reinstalled the newly covered floorboards and seats. All that is left is detailing! RivieraJack rebuilt the fuel pump after last week's engine test. 1935 ElectriCraftThe guys flipped the boat, Jack cleaned it up, and Shane prepped and started fiberglassing the keel.
|
Welcome!Check back weekly for updates about our current projects and shop happenings! Archives
April 2025
Categories |