Lyman IslanderHawke did some interior painting on the boat before we lifted it up high so Jack could take a look at the bottom. There was flaking and peeling paint there too, so Jack has been using the heat gun and scraping to remove that. 1957 Chris Craft ContinentalJack installed new seat frames and a battery box, ran new battery cable, and then screwed down the floors and installed all the baseboard trim. He also milled, cut, and fit a new quarter round rear deck trim. Shane has been working on the engine box. Concordia SloopGary is back from his adventures in Maine and he's packing cotton caulking in the seams of the sloop. Carolina Flats BoatShane has been grinding the fiberglass edges here in preparation for installing the hatches on the deck.
0 Comments
Leave a Reply. |
Welcome!Check back weekly for updates about our current projects and shop happenings! Archives
March 2025
Categories |